Msi Gtx 1060 Fans Not Spinning High Temperature

TomTriv

Hello all,

I'm currently having issues with a G GTX 1650 OC (4GB), I've spent a couple of hours troubleshooting with looking around the forums and difficult to scotch-gaudy to another BIOS to allow for the reduction in the fan speed bellowing 59%.

I've tried multiple guides which use the 1650 but with none luck, I've experienced cross-bright before but never had these issues. It seems like I'm nerve-racking to cross-flash to another board ID, which means when victimization the stylish interpretation of nvflash it comes up with the GPU mismatch error. Just curious if anyone has experienced this with the same GPU and could point Pine Tree State in a full counselling with specific forums or the correct bios what has the same device Idaho etc.

I've looked around for drivers, as I'm aiming to cross-flash to a Gigabyte 1650 Windforce version which allows for the fan stop feature. Just the fan hasten at 1800rpm is obnoxiously loud at idle.

I've followed these guides what have been posted on this forum in front:

Thanks.

Regeneration

Which version of Gigabyte GTX 1650 you have? GDDR5 or GDDR6?

TomTriv

Which version of Gigabyte GTX 1650 you have? GDDR5 surgery GDDR6?

I have the GDDR6 version of the 1650.

TomTriv

No luck, still getting a GPU mismatch error attributable the device ID.

Regeneration · Connected Oct 26, 2005 Messages 2,666 (0.45/day)

What is your deviceID on GPU-Z? according to the database, information technology should be 1F82.

TomTriv

What is your deviceID on GPU-Z? according to the database, information technology should be 1F82.

According to GPU-Z it is 10DE.

Regeneration

10DE is rightful Nvidia vendor ID. It should be 10DE-something.

Nike_486DX

Firstable, did u make secure that the idle gpu temp is within unobjectionable tramp? Like 50C and lour. Because if the fan doesnt stop at idle, there should be a reason for that (for reference, even my rx 580 in furmark doesnt decease beyond 36%, and that is an genuine and unefficient bill, which consumes like 3x power compared to a 1650 :eek:

.

TomTriv

10DE is impartial Nvidia vendor ID. It should constitute 10DE-something.

10DE 2188-1458-4028.

Firstable, did u make sure that the idle gpu temporary is within satisfactory range? Like 50C and lower. Because if the buff doesnt stop at idle, there should be a reason for that (for reference, even my rx 580 in furmark doesnt go beyond 36%, and that is an old and unefficient card, which consumes like 3x power compared to a 1650.

The issue is with this model from Gigabyte, the fan is locked at 64% even when its at eg 26 degrees.

Regeneration

Firstable, did u make a point that the idle gpu temp is inside satisfactory range? Like 50C and lower. Because if the winnow doesnt stop at idle, on that point should be a reason for that (for reference, even my rx 580 in furmark doesnt go beyond 36%, and that is an old and unefficient card, which consumes the likes of 3x power compared to a 1650.

Some vendors set the minimum rooter upper too high so flat in idle or lowset temperatures the fans are still too fortissimo.

Nike_486DX

10DE 2188-1458-4028.

The issue is with this model from Gigabyte, the fan is bolted at 64% even out when its at eg 26 degrees.

Oh, thats non good. Can you please check if the lover header (on this gpu) is 2pin? If thats true, (and its not 4 pin) then idle-stop would be problematic, cuz if the card doesnt experience the necessary circuitry then the bios flash habit do much.

Regeneration

There is no Gigabyte SKUs in the database for this device ID.

Just other vendors:

You buns render to flash the reference interlingual rendition:

TomTriv

Oh, thats not good. Can you delight check if the fan header (on this gpu) is 2pin? If thats true, (and its not 4 pin) and then idle-stop would be problematic, cuz if the board doesnt have the necessary circuitry then the bios winkle use do much.

The rooter header is a 2 pin, just checked.

Nike_486DX

The fan lintel is a 2 pin, just checked.

Yea... i think back i knew the card model, had build a pc for a champion a couple of months ago. The (easiest) option to lower the noise is to cleave one of the fan cables and put a 25ohm resistor into there, that would lower the rpm to the likes of 1000.

Regeneration

The fan head is a 2 pin, clean checked.

Some 2-stick fan headers still have fan ascendancy, but a more than primitive one, just by voltage.

TomTriv · Coupled Nov 21, 2022 Messages 9 (0.20/day)

There is no Gigabyte SKUs in the database for this device ID.

Just other vendors:

You tush strain to flash the reference version:

Just completed the flash, its reduced the haphazardness story considerably. Seems like it's running at 35%?

Regeneration

Just completed the flash, its reduced the randomness level considerably. Seems like-minded it's running play at 35%?

View attachment 226031

0 Rev? Earn sure enough the fans runs at charge, and the card still works every bit intended (run some 3D app).

TomTriv · United Nov 21, 2022 Messages 9 (0.20/day)

0 RPM? Make sure the fans runs at load, and the plug-in still works American Samoa well-meant (run whatever 3D app).

I'll run some tests now, the rooter seems to comprise spinning at 35% from the noise levels - arsenic from the retired bios it used to course at 35% when booting.

Regeneration

0 RPM is normal for 2-pin fan header, simply make dependable the fan and card even so work.

TomTriv · Married Nov 21, 2022 Messages 9 (0.20/solar day)

0 RPM is normal for 2-pin fan header, but pretend sure the fan and card still work.

Just realised the tests, the fan operates unremarkably and with the temperature. Managed to contact 57.9 degrees with a fan speed of 60%, with idle lover speeds at a marginal of 35% with a temp of around 35 degrees. Just seems like the BIOS transfer has bricked the RPM reading, as it stuck at 0RPM whilst the fan speeds changed with the temporary worker.

barracuda

Hi,

Could you please tell me if your carte is a rev 1.0, rev 2.0 or rev 3.0 ?

I have the rev 2.0 edition (the one with TU106), i flashed it with the bios of the Windforce OC rev 2.0.
It's utter now, i control the fan speed, and revolutions per minute is displayed right.

m2c

Nike_486DX

HI,

Could you please tell me if your card is a rev up 1.0, rpm 2.0 or rev 3.0 ?

I rich person the rev 2.0 variation (the unitary with TU106), i flashed IT with the bios of the Windforce OC revolutions per minute 2.0.
IT's perfect now, i ascendance the fan cannonball along, and rpm is displayed correctly.

m2c

TU106 is rtx range, the op was speaking about 1650. So completely different cards.
Edit: sorry there is a tu106 translation of 1650 indeed, simply as you said that with your card you posterior adjust the fan rpm and stuff, your card's rooter appears to have pwm (4 pin connector), which once again differs from the op's plac cuz his card had 2pin fan

barracuda

TU106 is rtx range, the op was talk about 1650. So completely different card game.

As was common, what you are saying is wrong man.
I do have a gigabyte gtx 1650 oc rev 2.0.
IT's a TU106, IT's locked with little shaders...

Here is the trial impression:

Delight try to not mislead people here as bright mathematical operation are error prone, but with you around it could really be dramatic...

Nike_486DX

As usual, what you are saying is wrong man.
I do have a gigabyte gtx 1650 oc rev 2.0.
Information technology's a TU106, it's locked with less shaders...

Hither is the trial impression:

Please try to not mislead people here as flashing operation are computer error prone, only with you around information technology could really be spectacular...

did you read the whole thing Sir?

System Name	UniRig
C.P.U.	i7-7800X @4.3GHz (1.1v)
Motherboard	MSI X299 Tomahawk
Cooling	DeepCool Neptwin (1x 120mm TF fan)
Memory	2x16GB Corsair LPX 3600MHz
Video Card(s)	MSI GTX 1060 6GB Gaming X
Storage	32GB Optane (standalone for OS) + 2TB Seagate Skyhawk (2016) + 1TB WD Caviar Blue (2010)
Audio Twist(s)	integrated Realtek crap
Power Supply	Seasonic SSR-750FX
Mouse	Logitech G502
Keyboard	Old IBM
Software system	Windows 7 Ultimate SP1

System Name	UniRig
Processor	i7-7800X @4.3GHz (1.1v)
Motherboard	MSI X299 Hatchet
Cooling	DeepCool Neptwin (1x 120mm TF lover)
Memory	2x16GB Corsair LPX 3600MHz
Video Circuit board(s)	MSI GTX 1060 6GB Play X
Storage	32GB Optane (standalone for OS) + 2TB Seagate Skyhawk (2016) + 1TB WD Caviar Blue (2010)
Audio Device(s)	integrated Realtek crap
Power Supply	Seasonic SSR-750FX
Sneak out	Logitech G502
Keyboard	Old IBM
Package	Windows 7 Ultimate SP1

Arrangement Epithet	UniRig
Processor	i7-7800X @4.3GHz (1.1v)
Motherboard	MSI X299 Tomahawk
Cooling	DeepCool Neptwin (1x 120mm TF sports fan)
Memory	2x16GB Corsair LPX 3600MHz
Video Wag(s)	MSI GTX 1060 6GB Gaming X
Reposition	32GB Optane (standalone for OS) + 2TB Seagate Skyhawk (2016) + 1TB WD Caviar Blue (2010)
Audio Device(s)	integrated Realtek crap
Big businessman Supply	Seasonic SSR-750FX
Sneak away	Logitech G502
Keyboard	Old IBM
Software	Windows 7 Crowning SP1

Organization Name	UniRig
Processor	i7-7800X @4.3GHz (1.1v)
Motherboard	MSI X299 Tomahawk
Cooling	DeepCool Neptwin (1x 120mm TF fan)
Memory	2x16GB Corsair LPX 3600MHz
Video recording Card(s)	MSI GTX 1060 6GB Gaming X
Storage	32GB Optane (standalone for OS) + 2TB Seagate Skyhawk (2016) + 1TB WD Caviar Blue (2010)
Audio Gimmick(s)	integrated Realtek crap
Power Supply	Seasonic SSR-750FX
Mouse	Logitech G502
Keyboard	Old IBM
Software program	Windows 7 Eventual SP1

System Name	UniRig
Processor	i7-7800X @4.3GHz (1.1v)
Motherboard	MSI X299 Tomahawk
Cooling	DeepCool Neptwin (1x 120mm TF fan)
Memory	2x16GB Barbary pirate LPX 3600MHz
Video Card(s)	MSI GTX 1060 6GB Play X
Warehousing	32GB Optane (standalone for Operating system) + 2TB Seagate Skyhawk (2016) + 1TB WD Caviar Blue (2010)
Audio Device(s)	integrated Realtek crap
Power Supplying	Seasonic SSR-750FX
Mouse	Logitech G502
Keyboard	Old IBM
Software	Windows 7 Ultimate SP1

Msi Gtx 1060 Fans Not Spinning High Temperature

TomTriv

New Phallus

Regeneration

NGOHQ.COM

TomTriv

Fres Extremity

Regeneration

NGOHQ.COM

TomTriv

New Member

Regeneration

NGOHQ.COM

TomTriv

New Member

Regeneration

NGOHQ.COM

TomTriv

New Member

Regeneration

NGOHQ.COM

Re-formation

NGOHQ.COM

TomTriv

Fres Member

Positive feedback

NGOHQ.COM

TomTriv

New Penis

Regeneration

NGOHQ.COM

TomTriv

New Phallus

Positive feedback

NGOHQ.COM

TomTriv

Untried Member

barracuda

New Member

barracuda

Early Member

Post a Comment

Contact Form